Brand:AUTEL
OBD interface: OBD
Connectivity: Wi-Fi Bluetooth 5.0 USB 2.0 Type-C
Operating system: Android™ 9.0
Storage: 2GB RAM/64GB onboard storage
Camera: 8 megapixels
Battery: 4950mAh lithium polymer battery
Processor: Rockchip PX30 (4x ARM Cortex-A35 1.5 GHz)
Screen: 5.5 inch screen with a resolution of 1280 x 720
Autel MaxiIM KM100E:
MaxiIM KM100E is an advanced button and immobilizer touchscreen tablet that enables smart key making and IMMO learning via OBD. This 5.5 inch Android touchscreen tablet with Bluetooth VCI can program the Autel IKEY as a smart key replacement for more than 700 vehicles and provides IMMO programming capabilities for multiple vehicle brands such as BMW, Volkswagen, Toyota, Honda and General Motors. Other innovative features include key renewal and transponder editing of 20 supported protocols.
Key Features:
• 60-second key generation (Autel Universal only)
• Read/Write/Clone transponders
• Frequency detection with ignition coil detection
• Compatible with Autel Blank Universal Smart Keys
• Key Renewal: Support for 36 vehicle brands
• Transponder Editing: Support 20 categories
• Dual band, high frequency transmitter 315m/434m or 868m/915m
• Support for certification requirements of different regions
• Support of the SPS V200
60 key generation:
Supports 700+ model years for European, American and Asian models; 60 seconds to generate a sub-machine, the efficiency is increased by 50%, and the generation of the sub-machine is simple and efficient. After the sub-machine is generated, one-click jump to the anti-theft matching function of the corresponding model, without menu selection again, the process is simple and coherent.
2 pieces Altar Ikey:
• Support 8 series, 37 kinds of performances and keep increasing.
• Supports compatible low frequency (315M/433M) and high frequency (868M/915M) types.
• Each model is implemented strictly according to the acceptance indicators of immo, RKE and PKE.
8 Serices IMMO types: ID46, ID47, ID49, ID4A, ID5C, Megamos 48, MQB. (ID4D: ID4D has only one remote control. If the key is dead and the vehicle cannot be started in an emergency, an additional 4D transponder needs to be installed.)
Transponder reading:
Reading the transponder gives you access to some basic information of the key including chip type, IMMO type, transponder ID, lock status and code mode. To read the transponder information, insert the transponder into the transponder slot or insert the key into the key slot and tap the Read button. The Transponder Information screen is displayed.
Cloning of transponders:
This feature allows you to capture the transponder and vehicle information to decode a code to be used to directly clone and generate a working transponder for your vehicle. The whole process saves the hassle of using the old OBD approach.
The KM100 supports different transponder types for cloning and editing. Select the appropriate cloning method based on your transponder identification number (ID).
• 46 password calculation
• Clone 42 transponders
• Clone 11 transponders
• Clone 12 transponders
• Clone 13 transponders
• Clone 33 transponders
• Clone 8C transponder
Transponder processing:
This function helps you to read and edit transponder information, such as B. Configurations and EEPROM data. Choose an IMMO type (which can be accessed via the transponder reading function) and start editing according to your needs. When a write operation completes successfully, the message "Write Successful" appears and you can proceed to another operation.
Transponder functions:
1. Read out chip type, IMMO type, transponder ID, locking status, code mode etc.
2. Generate a working transponder for your vehicle.
3. Edit transponder information0
4. Transponder simulation function can be used to simulate KM100E as a transponder with a variety of IMMO protocols. This feature is especially useful if your vehicle needs an emergency start or something similar.
5. Conversion between two types of Ford transponders - ID63 and ID83.
Frequency detection:
Frequency detection function supports smart key frequency detection for a variety of car models. Operating instructions and frequency data are displayed on the screen in both text and graph form.
IMMO features:
The IMMO application requires a data connection to the test vehicle's IMMO electronic controller for diagnostics via an OBDII connection. The application retrieves vehicle IMMO information and performs IMMO-related functions including key learning, remote control learning and remote control adding, etc.
1.IMMO Status Scan--The IMMO status scan function performs a comprehensive scan of all systems in the vehicle by IMMO ECU to locate fault systems and retrieve DTCs.
2.Control Unit --This option allows you to manually locate a required IMMO control system for testing through a series of choices. The function menu may include: immobilizer, remote control system, Bosch(MED9) motor.
3.Hot Feature--Hot Feature consists of guided features with step-by-step instructions. The available functions may vary depending on the test vehicle. In this case, only the Add Key (Guided) function is available. Follow the on-screen instructions to complete the process.
4.Vehicle IMMO Information--This function retrieves and displays the specific information for the tested IMMO ECU, including vehicle VIN number, PIN code and other IMMO information.
Key unlock:
The Key Unlocking feature allows you to renew a used smart key to unlock a new car. This is achieved by updating the firmware of the smart key used via a wired connection.
Toyota Smart Unlock:
You can use this feature to unlock other Toyota models with your Toyota smart key.
How to perform Toyota Smart Unlocking:
1. Insert your key into the key slot.
2. Tap the Unlock button on the bottom screen to start unlocking.
3. The LED on your key will illuminate, indicating that unlocking was successful.
Recognition of universal key information:
The Universal Key Information Detection function is specially designed to read the Autel Universal Key information including Serial Number, Key ID and IMMO Version etc.
Key Setting:
The button customization feature allows you to customize the buttons on the Autel universal key.
A notice:
1. The remote control button icons on the left correspond to the key buttons but do not necessarily represent the actual button functions.
2. If the function of a button on the universal key does not match that of the original key or there is a custom requirement, change the corresponding button value.
3. If the number of buttons on the universal key is not enough, combined buttons can be added for the corresponding button function.
Ignition Coil Detection:
The ignition coil detection function allows the key tool to collect the data of the vehicle's IMMO protocol and transponder type
Vehicle Compatibility:
• AutoVIN support
• Simple operation, guided user guide, easy to use
• Industry-leading coverage of IMMO learning via OBD for more than 90% of models
• Support for 8 key series and 37 models
• Coverage of the top 100 best selling models in North America for the last 10 years
Vehicle VIN:
The MaxiIM diagnostic system supports four methods of vehicle identification: AutoVIN, manual VIN entry, automatic selection, manual selection.
List of supported Autel MaxiIM KM100E:
Like Acura, Alfa, Audi, BAICHuansu, BAICMotor, BaicNe, BaicSenov, BAICWeiw, Baojun, Bmw, Borgward, BYD, CfMotor, ChangAn, ChanganSuzuki, Changhe, Chery, Chrysler, Citroen, Dacia, DFVenucia, Dodge, DS, Emgrand, EXEED , Fawcar, Fiat, FiatBrazil, Ford, FordAU, FordChina, FordEU, GACMotor, GM, GreatWall, Haval, Holden, Hyundai, Infiniti, JAC , JAC, Jaguar, JEEP, JETOUR, JMC, Karry, Kia, LandRover, LandRover, Maserati , Mazda, Mitsubishi, Nissan, Opel, Ora, Perodua, Peugeot, Porsche, Renault, Roewe, SaDatong, Seat, Skoda, Suzuki, Toyota, Traum, Volkswagen, WEY, ZOTYE......
Specifications:
Operating system: Android™ 9.0
Processor: Rockchip PX30 (4x ARM Cortex-A35 1.5 GHz)
Memory: 2GB RAM/64GB onboard storage
Screen: 5.5 inch screen with a resolution of 1280 x 720
Camera: 8 megapixels
Connection: Wi-Fi; Bluetooth 5.0; USB 2.0 Type-C
Battery: 4950mAh lithium polymer battery
VCI: V200
Input: 5V/2A
Sensor: Ambient light sensor audio input
/-Output: MIC: supported; Speaker: supported
Dimensions (W x H x D): 200mm (7.9") x 89mm (3.5") x 22mm (0.87")
Weight: 352.7g (0.8lb)
Operating temperature: 10 to 45 °C (14 to 113 °F)
Storage temperature: -20 to 60 °C (-4 to 140 °F)
